Crafting Your Own Enchanting Moongate

Moongates, mystical portals steeped in ancient lore, have captivated imaginations for centuries. Said to bridge distant realms, they are not only a testament to magical craftsmanship but also make captivating additions to gardens and landscapes. In this guide, we’ll walk you through the process of creating your very own moongate using a ring of standing stones.

Materials Needed:

1. A ring of standing stones (commonly found at archaeological sites)
2. Twelve cartloads of stone, sand, and earth
3. Spade, pickaxe, crowbar, mallet, chisel, hammer
4. Level, spirit level
5. Tape measure, compass
6. Set of steps, wheelbarrow
7. Strong man (or two)

Planning and Designing a Moongate:

Selecting the Right Location:

To start your moongate project, choose a location where the moon can be easily observed. An open area, free of obstructions, will provide the best setting.

1. Use a compass to mark out the area where the moongate will stand, ensuring it’s centered.

Creating the Foundation:

2. Dig a trench in the marked area, at least two feet deep and six feet wide, using a spade.
3. Fill the trench with a layer of stone, packing it down with a crowbar.
4. Add a layer of sand and earth, packing each layer down securely.
5. Mark the center of the moongate using a compass.
6. Dig a hole in the center, again two feet deep and six feet wide.
7. Fill the hole with a layer of stone, packing it down firmly.
8. Add layers of sand and earth, packing them down as before.

Building the Moongate Structure:

9. Place the ring of standing stones around the moongate, ensuring they are level.
10. Use a spirit level to confirm the moongate’s levelness.
11. Chisel the edges of the moongate with a chisel and mallet.
12. Use a hammer and tape measure to mark the dimensions of the moongate.
13. Re-check the level with a spirit level.
14. Use a set of steps to access the moongate.
15. Use a wheelbarrow to add earth and sand to the moongate.
16. Utilize a strong man (or two) to adjust the standing stones as needed.

Installing and Securing the Moongate Posts:

1. Construct two iron posts, firmly anchoring them in the ground.
2. Clear a 20-foot diameter area around the posts.
3. Cast the moongate creation spell within this area, closing the circle before completion.
4. A block of obsidian must be placed in the center of the frame for activation.
5. Step through the gate promptly, as it will only remain open for a short time.
6. Remember that if the circle is broken, the gate will not open.

Maintenance and Care of the Moongate:

1. Keep the moongate clean using a damp cloth to wipe away dirt and debris.
2. Store the moongate in a dry place, avoiding exposure to moisture or rain.
3. Keep the moongate in a secure location, away from children and pets.
4. Regularly inspect the moongate for damage or wear and tear, and repair as needed.

Conclusion:

With patience and careful craftsmanship, you can create a moongate that not only captivates the imagination but also serves as a stunning addition to your garden or landscape. Remember to maintain and care for your moongate to ensure its magical properties remain intact for years to come. Happy crafting!